Бесштоковые пневмоцилиндры

compact design cuts space requirement by 50% compared to rodded cylinders. Additionally, the extruded tube construction requires fewer supports than other cylinders. Dual air supply at one end eliminates tubing going to the opposite end of the cylinder. This design prevents interference with the operation of the cylinder.

Standard Specifications:
Anodized single barrel extrusions
Various bore sizes, 25, 32, 40, and 50mm
G or NPT ports available
Retained cushion adjustments
Kevlar reinforced thermosplastics strip seals
Up to 10bar (145 psig) working pressure
Ambient temperature range from -20ºC to + 80ºC (–4ºF to +175ºF)
Uses filtered air with or without lubrication
Standard stroke lengths up to 6 meters (19.5')
Operating Speeds up to 3 m/sec (9.75ft./sec)

Applications Include:
Material Handling - Parts handling with an overhead gantry
Manufacturing and process - Tool and parts carrier/automotive
Packaging - Corrugated box erector - Plastic heat seal equipment

Numatics' Heavy Duty G Series Rodless Cylinder incorporates an NSK bearing rail and bearing sliders for incredible load carrying capabilities with the field-proven S1 Series rodless cylinder delivering millions of reliable cycles.

Standard Specifications:
Anodized single barrel extrusions
Various bore sizes, 25, 32, 40, and 50mm
G or NPT ports available
Retained cushion adjustments
Kevlar reinforced thermosplastics strip seals
Up to 10bar (145 psig) working pressure
Ambient temperature range from -20ºC to + 80ºC (–4ºF to +175ºF)
Uses filtered air with or without lubrication
Standard stroke lengths up to 6 meters (19.5')
Operating ppeeds up to 3 m/sec (9.75ft./sec)
NSK hardened guide rail(s)
Floating coupler between the piston/carriage assembly and the tooling plate
Moment capabilites in excess of 100,000 in-lbs

The MCR Series cylinder consists of a piston and a carriage, which are coupled together using rare earth magnets. When the cylinder is pressurized from one end, the piston will travel the length of the tube, which in turn moves the carriage. Pressurizing the other side the carriage will travel back the length of the tube. They are available in various bore sizes and coupling strengths.

Standard Specifications:
Bore sizes include: 12mm, 16mm, 20mm, 25mm, 32mm, 40mm
304 series stainless steel barrel
Operating pressure up to 7 bar, (100 psi.)
Ambient temperature range, -20ºC to + 60ºC (–4ºF to +140ºF)
Medium, filtered air, with or without lubrication, & low pressure hydraulic
Standard stroke lengths for non-guided (MC1, MC2) up to 2540mm(100") for guided (MC3, MC4, MC5) up to 1524mm (60")
Non-rotating linear travel (MC3, MC4, MC5)
Cushions are standard on the non-guided series for load deceleration
Operating speeds up to 1 m/sec (3.28ft./sec)